Contract 0xDC78901e0FC2097B07008f98Fb28F57fBA0a2CB7

Contract Overview

Balance:
0 Ether
Txn Hash
Method
Block
From
To
Value
0x38810b40f1afa6884fa138ce99377c09e14abbd39b1b09d25da07d9805b98724Freeze89022842021-07-08 19:24:17361 days 4 hrs ago0xe0f4217390221af47855e094f6e112d43c8698fe IN  0xdc78901e0fc2097b07008f98fb28f57fba0a2cb70 Ether0.000044231
0xd3c20fbf5222b7671f527ab2a793d5a5ec6d6b17dcf3cc06532c771132ba54740x6080604089022832021-07-08 19:24:02361 days 4 hrs ago0xe0f4217390221af47855e094f6e112d43c8698fe IN  Create: MultiTokenListener0 Ether0.001156741
[ Download CSV Export 
Parent Txn Hash Block From To Value
Loading

Contract Source Code Verified (Exact Match)

Contract Name:
MultiTokenListener

Compiler Version
v0.6.12+commit.27d51765

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion, MIT license
File 1 of 20 : OwnableUpgradeable.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/Initializable.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal initializer {
        __Context_init_unchained();
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal initializer {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
    uint256[49] private __gap;
}

File 2 of 20 : IERC165Upgradeable.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165Upgradeable {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

File 3 of 20 : IERC1820RegistryUpgradeable.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the global ERC1820 Registry, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1820[EIP]. Accounts may register
 * implementers for interfaces in this registry, as well as query support.
 *
 * Implementers may be shared by multiple accounts, and can also implement more
 * than a single interface for each account. Contracts can implement interfaces
 * for themselves, but externally-owned accounts (EOA) must delegate this to a
 * contract.
 *
 * {IERC165} interfaces can also be queried via the registry.
 *
 * For an in-depth explanation and source code analysis, see the EIP text.
 */
interface IERC1820RegistryUpgradeable {
    /**
     * @dev Sets `newManager` as the manager for `account`. A manager of an
     * account is able to set interface implementers for it.
     *
     * By default, each account is its own manager. Passing a value of `0x0` in
     * `newManager` will reset the manager to this initial state.
     *
     * Emits a {ManagerChanged} event.
     *
     * Requirements:
     *
     * - the caller must be the current manager for `account`.
     */
    function setManager(address account, address newManager) external;

    /**
     * @dev Returns the manager for `account`.
     *
     * See {setManager}.
     */
    function getManager(address account) external view returns (address);

    /**
     * @dev Sets the `implementer` contract as ``account``'s implementer for
     * `interfaceHash`.
     *
     * `account` being the zero address is an alias for the caller's address.
     * The zero address can also be used in `implementer` to remove an old one.
     *
     * See {interfaceHash} to learn how these are created.
     *
     * Emits an {InterfaceImplementerSet} event.
     *
     * Requirements:
     *
     * - the caller must be the current manager for `account`.
     * - `interfaceHash` must not be an {IERC165} interface id (i.e. it must not
     * end in 28 zeroes).
     * - `implementer` must implement {IERC1820Implementer} and return true when
     * queried for support, unless `implementer` is the caller. See
     * {IERC1820Implementer-canImplementInterfaceForAddress}.
     */
    function setInterfaceImplementer(address account, bytes32 _interfaceHash, address implementer) external;

    /**
     * @dev Returns the implementer of `interfaceHash` for `account`. If no such
     * implementer is registered, returns the zero address.
     *
     * If `interfaceHash` is an {IERC165} interface id (i.e. it ends with 28
     * zeroes), `account` will be queried for support of it.
     *
     * `account` being the zero address is an alias for the caller's address.
     */
    function getInterfaceImplementer(address account, bytes32 _interfaceHash) external view returns (address);

    /**
     * @dev Returns the interface hash for an `interfaceName`, as defined in the
     * corresponding
     * https://eips.ethereum.org/EIPS/eip-1820#interface-name[section of the EIP].
     */
    function interfaceHash(string calldata interfaceName) external pure returns (bytes32);

    /**
     *  @notice Updates the cache with whether the contract implements an ERC165 interface or not.
     *  @param account Address of the contract for which to update the cache.
     *  @param interfaceId ERC165 interface for which to update the cache.
     */
    function updateERC165Cache(address account, bytes4 interfaceId) external;

    /**
     *  @notice Checks whether a contract implements an ERC165 interface or not.
     *  If the result is not cached a direct lookup on the contract address is performed.
     *  If the result is not cached or the cached value is out-of-date, the cache MUST be updated manually by calling
     *  {updateERC165Cache} with the contract address.
     *  @param account Address of the contract to check.
     *  @param interfaceId ERC165 interface to check.
     *  @return True if `account` implements `interfaceId`, false otherwise.
     */
    function implementsERC165Interface(address account, bytes4 interfaceId) external view returns (bool);

    /**
     *  @notice Checks whether a contract implements an ERC165 interface or not without using nor updating the cache.
     *  @param account Address of the contract to check.
     *  @param interfaceId ERC165 interface to check.
     *  @return True if `account` implements `interfaceId`, false otherwise.
     */
    function implementsERC165InterfaceNoCache(address account, bytes4 interfaceId) external view returns (bool);

    event InterfaceImplementerSet(address indexed account, bytes32 indexed interfaceHash, address indexed implementer);

    event ManagerChanged(address indexed account, address indexed newManager);
}

File 4 of 20 : SafeMathUpgradeable.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMathUpgradeable {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

File 5 of 20 : Initializable.sol
// SPDX-License-Identifier: MIT

// solhint-disable-next-line compiler-version
pragma solidity >=0.4.24 <0.8.0;

import "../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 */
abstract contract Initializable {

    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }

        _;

        if (isTopLevelCall) {
            _initializing = false;
        }
    }

    /// @dev Returns true if and only if the function is running in the constructor
    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}

File 6 of 20 : IERC20Upgradeable.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

File 7 of 20 : AddressUpgradeable.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

File 8 of 20 : ContextUpgradeable.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;
import "../proxy/Initializable.sol";

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal initializer {
        __Context_init_unchained();
    }

    function __Context_init_unchained() internal initializer {
    }
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
    uint256[50] private __gap;
}

File 9 of 20 : SafeCastUpgradeable.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;


/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCastUpgradeable {

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value < 2**128, "SafeCast: value doesn\'t fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value < 2**64, "SafeCast: value doesn\'t fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value < 2**32, "SafeCast: value doesn\'t fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value < 2**16, "SafeCast: value doesn\'t fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value < 2**8, "SafeCast: value doesn\'t fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= -2**127 && value < 2**127, "SafeCast: value doesn\'t fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= -2**63 && value < 2**63, "SafeCast: value doesn\'t fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= -2**31 && value < 2**31, "SafeCast: value doesn\'t fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= -2**15 && value < 2**15, "SafeCast: value doesn\'t fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= -2**7 && value < 2**7, "SafeCast: value doesn\'t fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        require(value < 2**255, "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

File 10 of 20 : FixedPoint.sol
/**
Copyright 2020 PoolTogether Inc.

This file is part of PoolTogether.

PoolTogether is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation under version 3 of the License.

PoolTogether is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with PoolTogether.  If not, see <https://www.gnu.org/licenses/>.
*/

pragma solidity >=0.6.0 <0.8.0;

import "./external/openzeppelin/OpenZeppelinSafeMath_V3_3_0.sol";

/**
 * @author Brendan Asselstine
 * @notice Provides basic fixed point math calculations.
 *
 * This library calculates integer fractions by scaling values by 1e18 then performing standard integer math.
 */
library FixedPoint {
    using OpenZeppelinSafeMath_V3_3_0 for uint256;

    // The scale to use for fixed point numbers.  Same as Ether for simplicity.
    uint256 internal constant SCALE = 1e18;

    /**
        * Calculates a Fixed18 mantissa given the numerator and denominator
        *
        * The mantissa = (numerator * 1e18) / denominator
        *
        * @param numerator The mantissa numerator
        * @param denominator The mantissa denominator
        * @return The mantissa of the fraction
        */
    function calculateMantissa(uint256 numerator, uint256 denominator) internal pure returns (uint256) {
        uint256 mantissa = numerator.mul(SCALE);
        mantissa = mantissa.div(denominator);
        return mantissa;
    }

    /**
        * Multiplies a Fixed18 number by an integer.
        *
        * @param b The whole integer to multiply
        * @param mantissa The Fixed18 number
        * @return An integer that is the result of multiplying the params.
        */
    function multiplyUintByMantissa(uint256 b, uint256 mantissa) internal pure returns (uint256) {
        uint256 result = mantissa.mul(b);
        result = result.div(SCALE);
        return result;
    }

    /**
    * Divides an integer by a fixed point 18 mantissa
    *
    * @param dividend The integer to divide
    * @param mantissa The fixed point 18 number to serve as the divisor
    * @return An integer that is the result of dividing an integer by a fixed point 18 mantissa
    */
    function divideUintByMantissa(uint256 dividend, uint256 mantissa) internal pure returns (uint256) {
        uint256 result = SCALE.mul(dividend);
        result = result.div(mantissa);
        return result;
    }
}

File 11 of 20 : OpenZeppelinSafeMath_V3_3_0.sol
// SPDX-License-Identifier: MIT

// NOTE: Copied from OpenZeppelin Contracts version 3.3.0

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library OpenZeppelinSafeMath_V3_3_0 {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

File 12 of 20 : Constants.sol
// SPDX-License-Identifier: GPL-3.0

pragma solidity >=0.6.0 <0.7.0;

import "@openzeppelin/contracts-upgradeable/introspection/IERC1820RegistryUpgradeable.sol";

library Constants {
  IERC1820RegistryUpgradeable public constant REGISTRY = IERC1820RegistryUpgradeable(0x1820a4B7618BdE71Dce8cdc73aAB6C95905faD24);

  // keccak256("ERC777TokensSender")
  bytes32 public constant TOKENS_SENDER_INTERFACE_HASH =
  0x29ddb589b1fb5fc7cf394961c1adf5f8c6454761adf795e67fe149f658abe895;

  // keccak256("ERC777TokensRecipient")
  bytes32 public constant TOKENS_RECIPIENT_INTERFACE_HASH =
  0xb281fc8c12954d22544db45de3159a39272895b169a852b314f9cc762e44c53b;

  // keccak256(abi.encodePacked("ERC1820_ACCEPT_MAGIC"));
  bytes32 public constant ACCEPT_MAGIC =
  0xa2ef4600d742022d532d4747cb3547474667d6f13804902513b2ec01c848f4b4;

  bytes4 public constant ERC165_INTERFACE_ID_ERC165 = 0x01ffc9a7;
  bytes4 public constant ERC165_INTERFACE_ID_ERC721 = 0x80ac58cd;
}

File 13 of 20 : TokenFaucet.sol
// SPDX-License-Identifier: GPL-3.0

pragma solidity >=0.6.0 <0.7.0;

import "@openzeppelin/contracts-upgradeable/math/SafeMathUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/SafeCastUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/Initializable.sol";
import "@pooltogether/fixed-point/contracts/FixedPoint.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";

import "../utils/ExtendedSafeCast.sol";
import "../token/TokenListener.sol";

/// @title Disburses a token at a fixed rate per second to holders of another token.
/// @notice The tokens are dripped at a "drip rate per second".  This is the number of tokens that
/// are dripped each second.  A user's share of the dripped tokens is based on how many 'measure' tokens they hold.
/* solium-disable security/no-block-members */
contract TokenFaucet is OwnableUpgradeable, TokenListener {
  using SafeMathUpgradeable for uint256;
  using SafeCastUpgradeable for uint256;
  using ExtendedSafeCast for uint256;

  event Initialized(
    IERC20Upgradeable indexed asset,
    IERC20Upgradeable indexed measure,
    uint256 dripRatePerSecond
  );

  event Dripped(
    uint256 newTokens
  );

  event Deposited(
    address indexed user,
    uint256 amount
  );

  event Withdrawn(
    address indexed to,
    uint256 amount
  );

  event Claimed(
    address indexed user,
    uint256 newTokens
  );

  event DripRateChanged(
    uint256 dripRatePerSecond
  );

  struct UserState {
    uint128 lastExchangeRateMantissa;
    uint128 balance;
  }

  /// @notice The token that is being disbursed
  IERC20Upgradeable public asset;

  /// @notice The token that is user to measure a user's portion of disbursed tokens
  IERC20Upgradeable public measure;

  /// @notice The total number of tokens that are disbursed each second
  uint256 public dripRatePerSecond;

  /// @notice The cumulative exchange rate of measure token supply : dripped tokens
  uint112 public exchangeRateMantissa;

  /// @notice The total amount of tokens that have been dripped but not claimed
  uint112 public totalUnclaimed;

  /// @notice The timestamp at which the tokens were last dripped
  uint32 public lastDripTimestamp;

  /// @notice The data structure that tracks when a user last received tokens
  mapping(address => UserState) public userStates;

  /// @notice Initializes a new Comptroller V2
  /// @param _asset The asset to disburse to users
  /// @param _measure The token to use to measure a users portion
  /// @param _dripRatePerSecond The amount of the asset to drip each second
  function initialize (
    IERC20Upgradeable _asset,
    IERC20Upgradeable _measure,
    uint256 _dripRatePerSecond
  ) public initializer {
    __Ownable_init();
    lastDripTimestamp = _currentTime();
    asset = _asset;
    measure = _measure;
    setDripRatePerSecond(_dripRatePerSecond);

    emit Initialized(
      asset,
      measure,
      dripRatePerSecond
    );
  }

  /// @notice Safely deposits asset tokens into the faucet.  Must be pre-approved
  /// This should be used instead of transferring directly because the drip function must
  /// be called before receiving new assets.
  /// @param amount The amount of asset tokens to add (must be approved already)
  function deposit(uint256 amount) external {
    drip();
    asset.transferFrom(msg.sender, address(this), amount);

    emit Deposited(msg.sender, amount);
  }

  /// @notice Allows the owner to withdraw tokens that have not been dripped yet.
  /// @param to The address to withdraw to
  /// @param amount The amount to withdraw
  function withdrawTo(address to, uint256 amount) external onlyOwner {
    drip();
    uint256 assetTotalSupply = asset.balanceOf(address(this));
    uint256 availableTotalSupply = assetTotalSupply.sub(totalUnclaimed);
    require(amount <= availableTotalSupply, "TokenFaucet/insufficient-funds");
    asset.transfer(to, amount);

    emit Withdrawn(to, amount);
  }

  /// @notice Transfers all unclaimed tokens to the user
  /// @param user The user to claim tokens for
  /// @return The amount of tokens that were claimed.
  function claim(address user) external returns (uint256) {
    drip();
    _captureNewTokensForUser(user);
    uint256 balance = userStates[user].balance;
    userStates[user].balance = 0;
    totalUnclaimed = uint256(totalUnclaimed).sub(balance).toUint112();
    asset.transfer(user, balance);

    emit Claimed(user, balance);

    return balance;
  }

  /// @notice Drips new tokens.
  /// @dev Should be called immediately before any measure token mints/transfers/burns
  /// @return The number of new tokens dripped.
  function drip() public returns (uint256) {
    uint256 currentTimestamp = _currentTime();

    // this should only run once per block.
    if (lastDripTimestamp == uint32(currentTimestamp)) {
      return 0;
    }

    uint256 assetTotalSupply = asset.balanceOf(address(this));
    uint256 availableTotalSupply = assetTotalSupply.sub(totalUnclaimed);
    uint256 newSeconds = currentTimestamp.sub(lastDripTimestamp);
    uint256 nextExchangeRateMantissa = exchangeRateMantissa;
    uint256 newTokens;
    uint256 measureTotalSupply = measure.totalSupply();

    if (measureTotalSupply > 0 && availableTotalSupply > 0) {
      newTokens = newSeconds.mul(dripRatePerSecond);
      if (newTokens > availableTotalSupply) {
        newTokens = availableTotalSupply;
      }
      uint256 indexDeltaMantissa = FixedPoint.calculateMantissa(newTokens, measureTotalSupply);
      nextExchangeRateMantissa = nextExchangeRateMantissa.add(indexDeltaMantissa);

      emit Dripped(
        newTokens
      );
    }

    exchangeRateMantissa = nextExchangeRateMantissa.toUint112();
    totalUnclaimed = uint256(totalUnclaimed).add(newTokens).toUint112();
    lastDripTimestamp = currentTimestamp.toUint32();

    return newTokens;
  }

  /// @notice Allows the owner to set the drip rate per second.  This is the number of tokens that are dripped each second.
  /// @param _dripRatePerSecond The new drip rate in tokens per second
  function setDripRatePerSecond(uint256 _dripRatePerSecond) public onlyOwner {
    require(_dripRatePerSecond > 0, "TokenFaucet/dripRate-gt-zero");

    // ensure we're all caught up
    drip();

    dripRatePerSecond = _dripRatePerSecond;

    emit DripRateChanged(dripRatePerSecond);
  }

  /// @notice Captures new tokens for a user
  /// @dev This must be called before changes to the user's balance (i.e. before mint, transfer or burns)
  /// @param user The user to capture tokens for
  /// @return The number of new tokens
  function _captureNewTokensForUser(
    address user
  ) private returns (uint128) {
    UserState storage userState = userStates[user];
    if (exchangeRateMantissa == userState.lastExchangeRateMantissa) {
      // ignore if exchange rate is same
      return 0;
    }
    uint256 deltaExchangeRateMantissa = uint256(exchangeRateMantissa).sub(userState.lastExchangeRateMantissa);
    uint256 userMeasureBalance = measure.balanceOf(user);
    uint128 newTokens = FixedPoint.multiplyUintByMantissa(userMeasureBalance, deltaExchangeRateMantissa).toUint128();

    userStates[user] = UserState({
      lastExchangeRateMantissa: exchangeRateMantissa,
      balance: uint256(userState.balance).add(newTokens).toUint128()
    });

    return newTokens;
  }

  /// @notice Should be called before a user mints new "measure" tokens.
  /// @param to The user who is minting the tokens
  /// @param token The token they are minting
  function beforeTokenMint(
    address to,
    uint256,
    address token,
    address
  )
    external
    override
  {
    if (token == address(measure)) {
      drip();
      _captureNewTokensForUser(to);
    }
  }

  /// @notice Should be called before "measure" tokens are transferred or burned
  /// @param from The user who is sending the tokens
  /// @param to The user who is receiving the tokens
  /// @param token The token token they are burning
  function beforeTokenTransfer(
    address from,
    address to,
    uint256,
    address token
  )
    external
    override
  {
    // must be measure and not be minting
    if (token == address(measure) && from != address(0)) {
      drip();
      _captureNewTokensForUser(to);
      _captureNewTokensForUser(from);
    }
  }

  /// @notice returns the current time.  Allows for override in testing.
  /// @return The current time (block.timestamp)
  function _currentTime() internal virtual view returns (uint32) {
    return block.timestamp.toUint32();
  }

}

File 14 of 20 : TokenListener.sol
pragma solidity ^0.6.4;

import "./TokenListenerInterface.sol";
import "./TokenListenerLibrary.sol";
import "../Constants.sol";

abstract contract TokenListener is TokenListenerInterface {
  function supportsInterface(bytes4 interfaceId) external override view returns (bool) {
    return (
      interfaceId == Constants.ERC165_INTERFACE_ID_ERC165 || 
      interfaceId == TokenListenerLibrary.ERC165_INTERFACE_ID_TOKEN_LISTENER
    );
  }
}

File 15 of 20 : TokenListenerInterface.sol
// SPDX-License-Identifier: GPL-3.0

pragma solidity >=0.5.0 <0.7.0;

import "@openzeppelin/contracts-upgradeable/introspection/IERC165Upgradeable.sol";

/// @title An interface that allows a contract to listen to token mint, transfer and burn events.
interface TokenListenerInterface is IERC165Upgradeable {
  /// @notice Called when tokens are minted.
  /// @param to The address of the receiver of the minted tokens.
  /// @param amount The amount of tokens being minted
  /// @param controlledToken The address of the token that is being minted
  /// @param referrer The address that referred the minting.
  function beforeTokenMint(address to, uint256 amount, address controlledToken, address referrer) external;

  /// @notice Called when tokens are transferred or burned.
  /// @param from The address of the sender of the token transfer
  /// @param to The address of the receiver of the token transfer.  Will be the zero address if burning.
  /// @param amount The amount of tokens transferred
  /// @param controlledToken The address of the token that was transferred
  function beforeTokenTransfer(address from, address to, uint256 amount, address controlledToken) external;
}

File 16 of 20 : TokenListenerLibrary.sol
pragma solidity ^0.6.12;

library TokenListenerLibrary {
  /*
    *     bytes4(keccak256('beforeTokenMint(address,uint256,address,address)')) == 0x4d7f3db0
    *     bytes4(keccak256('beforeTokenTransfer(address,address,uint256,address)')) == 0xb2210957
    *
    *     => 0x4d7f3db0 ^ 0xb2210957 == 0xff5e34e7
    */
  bytes4 public constant ERC165_INTERFACE_ID_TOKEN_LISTENER = 0xff5e34e7;
}

File 17 of 20 : ExtendedSafeCast.sol
// SPDX-License-Identifier: GPL-3.0

pragma solidity >=0.6.0 <0.7.0;

library ExtendedSafeCast {

  /**
    * @dev Converts an unsigned uint256 into a unsigned uint112.
    *
    * Requirements:
    *
    * - input must be less than or equal to maxUint112.
    */
  function toUint112(uint256 value) internal pure returns (uint112) {
    require(value < 2**112, "SafeCast: value doesn't fit in an uint112");
    return uint112(value);
  }

  /**
    * @dev Converts an unsigned uint256 into a unsigned uint96.
    *
    * Requirements:
    *
    * - input must be less than or equal to maxUint96.
    */
  function toUint96(uint256 value) internal pure returns (uint96) {
    require(value < 2**96, "SafeCast: value doesn't fit in an uint96");
    return uint96(value);
  }

}

File 18 of 20 : MultiTokenListener.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.4 <=8.0.0;

import "@pooltogether/pooltogether-contracts/contracts/token/TokenListener.sol";
import "@pooltogether/pooltogether-contracts/contracts/token-faucet/TokenFaucet.sol";

import "./external/AddressRegistry.sol";

/// @title MultiTokenListener is an ownable contract which holds a number of TokenFaucets
/// @notice MultiTokenListener passes through the ControlledToken beforeTokenMint and beforeTokenTransfer hooks to each TokenFaucet in its registry
contract MultiTokenListener is TokenListener, AddressRegistry {

    /// @notice Initiaize the MultiTokenListener and Registry
    /// @param _owner The owner address
    function initialize(address _owner) public initializer {
        initializeAddressRegistry("TokenFaucets", _owner);
    }

    /// @notice Freezes the contract, so that there is no owner.
    /// @dev Useful for proxy implementations
    function freeze() public initializer {
        // no-op
    }

    /// @notice Pass through the beforeTokenMint hook to all the registry TokenFaucets
    /// @param to The address being minted to
    /// @param amount The amount of controlledToken being minted
    /// @param controlledToken The controlledToken address being minted
    /// @param referrer The referrer address
    function beforeTokenMint(address to, uint256 amount, address controlledToken, address referrer) external override {

        address faucet = addressList.start();
        address end = addressList.end();

        while(faucet != end){
            TokenFaucet(faucet).beforeTokenMint(to, amount, controlledToken, referrer);
            faucet = addressList.next(faucet);
        }
    }

    /// @notice Pass through the beforeTokenTransfer hook to all the registry TokenFaucets
    /// @param from The address being transferred from
    /// @param to The address being transferred to
    /// @param amount The amount of controlledToken being transferred
    /// @param controlledToken The controlledToken address
    function beforeTokenTransfer(address from, address to, uint256 amount, address controlledToken) external override {

        address faucet = addressList.start();
        address end = addressList.end();

        while(faucet != end){
            TokenFaucet(faucet).beforeTokenTransfer(from, to, amount, controlledToken);
            faucet = addressList.next(faucet);
        }
    }

}

File 19 of 20 : AddressRegistry.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.4 <=8.0.0;

import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";

import "./MappedSinglyLinkedList.sol";

///@notice A registry to hold Contract addresses.  Underlying data structure is a singly linked list. 
contract AddressRegistry is OwnableUpgradeable {

    using MappedSinglyLinkedList for MappedSinglyLinkedList.Mapping;

    MappedSinglyLinkedList.Mapping internal addressList;

    /// @notice Emmitted when a contract has been added to the registry
    event AddressAdded(address indexed _address);
    
    /// @notice Emmitted when a contract has been removed to the registry
    event AddressRemoved(address indexed _address);

    /// @notice Emitted when all the registry addresses are cleared
    event AllAddressesCleared();

    /// @notice Storage field for what type of contract this Registry is storing 
    string public addressType;    
    
    /// @notice Initializes the AddressRegistry
    /// @param _addressType The Type of contract the AddressRegistry will hold
    /// @param _owner The address of the contract owner
    function initializeAddressRegistry(string memory _addressType, address _owner) internal {
        __Ownable_init();
        transferOwnership(_owner);
        addressType = _addressType;
        addressList.initialize();
    }

    /// @notice Returns an array of all contract addresses in the linked list
    /// @return Array of contract addresses
    function getAddresses() view external returns(address[] memory) {
        return addressList.addressArray();
    } 

    /// @notice Adds addresses to the linked list. Will revert if the address is already in the list.  Can only be called by the Registry owner.
    /// @param _addresses Array of contract addresses to be added
    function addAddresses(address[] calldata _addresses) public onlyOwner {
        for(uint256 _address = 0; _address < _addresses.length; _address++ ){
            addressList.addAddress(_addresses[_address]);
            emit AddressAdded(_addresses[_address]);
        }
    }

    /// @notice Removes an address from the linked list. Can only be called by the Registry owner.
    /// @param _previousContract The address positionally located before the address that will be deleted. This may be the SENTINEL address if the list contains one contract address
    /// @param _address The address to remove from the linked list. 
    function removeAddress(address _previousContract, address _address) public onlyOwner {
        addressList.removeAddress(_previousContract, _address); 
        emit AddressRemoved(_address);
    } 

    /// @notice Removes every address from the list
    function clearAll() public onlyOwner {
        addressList.clearAll();
        emit AllAddressesCleared();
    }
    
    /// @notice Determines whether the list contains the given address
    /// @param _addr The address to check
    /// @return True if the address is contained, false otherwise.
    function contains(address _addr) public returns (bool) {
        return addressList.contains(_addr);
    }

    /// @notice Gives the address at the start of the list
    /// @return The address at the start of the list
    function start() public view returns (address) {
        return addressList.start();
    }

    /// @notice Exposes the internal next() iterator
    /// @param current The current address
    /// @return Returns the next address in the list
    function next(address current) public view returns (address) {
        return addressList.next(current);
    }
    
    /// @notice Exposes the end of the list
    /// @return The sentinel address
    function end() public view returns (address) {
        return addressList.end();
    }

}

File 20 of 20 : MappedSinglyLinkedList.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.4 <=8.0.0;

/// @notice An efficient implementation of a singly linked list of addresses
/// @dev A mapping(address => address) tracks the 'next' pointer.  A special address called the SENTINEL is used to denote the beginning and end of the list.
library MappedSinglyLinkedList {

  /// @notice The special value address used to denote the end of the list
  address public constant SENTINEL = address(0x1);

  /// @notice The data structure to use for the list.
  struct Mapping {
    uint256 count;

    mapping(address => address) addressMap;
  }

  /// @notice Initializes the list.
  /// @dev It is important that this is called so that the SENTINEL is correctly setup.
  function initialize(Mapping storage self) internal {
    require(self.count == 0, "Already init");
    self.addressMap[SENTINEL] = SENTINEL;
  }

  function start(Mapping storage self) internal view returns (address) {
    return self.addressMap[SENTINEL];
  }

  function next(Mapping storage self, address current) internal view returns (address) {
    return self.addressMap[current];
  }

  function end(Mapping storage) internal pure returns (address) {
    return SENTINEL;
  }

  function addAddresses(Mapping storage self, address[] memory addresses) internal {
    for (uint256 i = 0; i < addresses.length; i++) {
      addAddress(self, addresses[i]);
    }
  }

  /// @notice Adds an address to the front of the list.
  /// @param self The Mapping struct that this function is attached to
  /// @param newAddress The address to shift to the front of the list
  function addAddress(Mapping storage self, address newAddress) internal {
    require(newAddress != SENTINEL && newAddress != address(0), "Invalid address");
    require(self.addressMap[newAddress] == address(0), "Already added");
    self.addressMap[newAddress] = self.addressMap[SENTINEL];
    self.addressMap[SENTINEL] = newAddress;
    self.count = self.count + 1;
  }

  /// @notice Removes an address from the list
  /// @param self The Mapping struct that this function is attached to
  /// @param prevAddress The address that precedes the address to be removed.  This may be the SENTINEL if at the start.
  /// @param addr The address to remove from the list.
  function removeAddress(Mapping storage self, address prevAddress, address addr) internal {
    require(addr != SENTINEL && addr != address(0), "Invalid address");
    require(self.addressMap[prevAddress] == addr, "Invalid prevAddress");
    self.addressMap[prevAddress] = self.addressMap[addr];
    delete self.addressMap[addr];
    self.count = self.count - 1;
  }

  /// @notice Determines whether the list contains the given address
  /// @param self The Mapping struct that this function is attached to
  /// @param addr The address to check
  /// @return True if the address is contained, false otherwise.
  function contains(Mapping storage self, address addr) internal view returns (bool) {
    return addr != SENTINEL && addr != address(0) && self.addressMap[addr] != address(0);
  }

  /// @notice Returns an address array of all the addresses in this list
  /// @dev Contains a for loop, so complexity is O(n) wrt the list size
  /// @param self The Mapping struct that this function is attached to
  /// @return An array of all the addresses
  function addressArray(Mapping storage self) internal view returns (address[] memory) {
    address[] memory array = new address[](self.count);
    uint256 count;
    address currentAddress = self.addressMap[SENTINEL];
    while (currentAddress != address(0) && currentAddress != SENTINEL) {
      array[count] = currentAddress;
      currentAddress = self.addressMap[currentAddress];
      count++;
    }
    return array;
  }

  /// @notice Removes every address from the list
  /// @param self The Mapping struct that this function is attached to
  function clearAll(Mapping storage self) internal {
    address currentAddress = self.addressMap[SENTINEL];
    while (currentAddress != address(0) && currentAddress != SENTINEL) {
      address nextAddress = self.addressMap[currentAddress];
      delete self.addressMap[currentAddress];
      currentAddress = nextAddress;
    }
    self.addressMap[SENTINEL] = SENTINEL;
    self.count = 0;
  }
}

Settings
{
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [],
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

Contract ABI

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_address","type":"address"}],"name":"AddressAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_address","type":"address"}],"name":"AddressRemoved","type":"event"},{"anonymous":false,"inputs":[],"name":"AllAddressesCleared","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[{"internalType":"address[]","name":"_addresses","type":"address[]"}],"name":"addAddresses","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"addressType","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"controlledToken","type":"address"},{"internalType":"address","name":"referrer","type":"address"}],"name":"beforeTokenMint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"controlledToken","type":"address"}],"name":"beforeTokenTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"clearAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_addr","type":"address"}],"name":"contains","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"end","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"freeze","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getAddresses","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"current","type":"address"}],"name":"next","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_previousContract","type":"address"},{"internalType":"address","name":"_address","type":"address"}],"name":"removeAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"start","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

Block Transaction Difficulty Gas Used Reward
Block Uncle Number Difficulty Gas Used Reward
Loading

A contract address hosts a smart contract, which is a set of code stored on the blockchain that runs when predetermined conditions are met. Learn more about addresses in our Knowledge Base.