Contract 0xC5B3cfcC8aD60565997cAEed1Cce6CC915A08B90

pragma solidity ^0.7.4;

contract ControllerErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        CONTROLLER_MISMATCH,
        INSUFFICIENT_SHORTFALL,
        INSUFFICIENT_LIQUIDITY,
        INVALID_CLOSE_FACTOR,
        INVALID_COLLATERAL_FACTOR,
        INVALID_LIQUIDATION_INCENTIVE,
        MARKET_NOT_ENTERED, // no longer possible
        MARKET_NOT_LISTED,
        MARKET_ALREADY_LISTED,
        MATH_ERROR,
        NONZERO_BORROW_BALANCE,
        PRICE_ERROR,
        PRICE_UPDATE_ERROR,
        REJECTION,
        SNAPSHOT_ERROR,
        TOO_MANY_ASSETS,
        TOO_MUCH_REPAY
    }

    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCEPT_PENDING_IMPLEMENTATION_ADDRESS_CHECK,
        EXIT_MARKET_BALANCE_OWED,
        EXIT_MARKET_REJECTION,
        SET_CLOSE_FACTOR_OWNER_CHECK,
        SET_CLOSE_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_NO_EXISTS,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_WITHOUT_PRICE,
        SET_IMPLEMENTATION_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_VALIDATION,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_PAUSE_GUARDIAN_OWNER_CHECK,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_PENDING_IMPLEMENTATION_OWNER_CHECK,
        SET_PRICE_ORACLE_OWNER_CHECK,
        SUPPORT_MARKET_EXISTS,
        SUPPORT_MARKET_OWNER_CHECK
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    /**
      * @dev use this when reporting an opaque error from an upgradeable collaborator contract
      */
    function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return uint(err);
    }
}

contract TokenErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        BAD_INPUT,
        CONTROLLER_REJECTION,
        CONTROLLER_CALCULATION_ERROR,
        INTEREST_RATE_MODEL_ERROR,
        INVALID_ACCOUNT_PAIR,
        INVALID_CLOSE_AMOUNT_REQUESTED,
        INVALID_COLLATERAL_FACTOR,
        MATH_ERROR,
        MARKET_NOT_FRESH,
        MARKET_NOT_LISTED,
        TOKEN_INSUFFICIENT_ALLOWANCE,
        TOKEN_INSUFFICIENT_BALANCE,
        TOKEN_INSUFFICIENT_CASH,
        TOKEN_TRANSFER_IN_FAILED,
        TOKEN_TRANSFER_OUT_FAILED
    }

    /*
     * Note: FailureInfo (but not Error) is kept in alphabetical order
     *       This is because FailureInfo grows significantly faster, and
     *       the order of Error has some meaning, while the order of FailureInfo
     *       is entirely arbitrary.
     */
    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCRUE_INTEREST_ACCUMULATED_INTEREST_CALCULATION_FAILED,
        ACCRUE_INTEREST_BORROW_RATE_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_BORROW_INDEX_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_BORROWS_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_RESERVES_CALCULATION_FAILED,
        ACCRUE_INTEREST_SIMPLE_INTEREST_FACTOR_CALCULATION_FAILED,
        BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
        BORROW_ACCRUE_INTEREST_FAILED,
        BORROW_CASH_NOT_AVAILABLE,
        BORROW_FRESHNESS_CHECK,
        BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
        BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
        BORROW_MARKET_NOT_LISTED,
        BORROW_CONTROLLER_REJECTION,
        LIQUIDATE_ACCRUE_BORROW_INTEREST_FAILED,
        LIQUIDATE_ACCRUE_COLLATERAL_INTEREST_FAILED,
        LIQUIDATE_COLLATERAL_FRESHNESS_CHECK,
        LIQUIDATE_CONTROLLER_REJECTION,
        LIQUIDATE_CONTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED,
        LIQUIDATE_CLOSE_AMOUNT_IS_UINT_MAX,
        LIQUIDATE_CLOSE_AMOUNT_IS_ZERO,
        LIQUIDATE_FRESHNESS_CHECK,
        LIQUIDATE_LIQUIDATOR_IS_BORROWER,
        LIQUIDATE_REPAY_BORROW_FRESH_FAILED,
        LIQUIDATE_SEIZE_BALANCE_INCREMENT_FAILED,
        LIQUIDATE_SEIZE_BALANCE_DECREMENT_FAILED,
        LIQUIDATE_SEIZE_CONTROLLER_REJECTION,
        LIQUIDATE_SEIZE_LIQUIDATOR_IS_BORROWER,
        LIQUIDATE_SEIZE_TOO_MUCH,
        MINT_ACCRUE_INTEREST_FAILED,
        MINT_CONTROLLER_REJECTION,
        MINT_EXCHANGE_CALCULATION_FAILED,
        MINT_EXCHANGE_RATE_READ_FAILED,
        MINT_FRESHNESS_CHECK,
        MINT_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
        MINT_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
        MINT_TRANSFER_IN_FAILED,
        MINT_TRANSFER_IN_NOT_POSSIBLE,
        REDEEM_ACCRUE_INTEREST_FAILED,
        REDEEM_CONTROLLER_REJECTION,
        REDEEM_EXCHANGE_TOKENS_CALCULATION_FAILED,
        REDEEM_EXCHANGE_AMOUNT_CALCULATION_FAILED,
        REDEEM_EXCHANGE_RATE_READ_FAILED,
        REDEEM_FRESHNESS_CHECK,
        REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
        REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
        REDEEM_TRANSFER_OUT_NOT_POSSIBLE,
        REDUCE_RESERVES_ACCRUE_INTEREST_FAILED,
        REDUCE_RESERVES_ADMIN_CHECK,
        REDUCE_RESERVES_CASH_NOT_AVAILABLE,
        REDUCE_RESERVES_FRESH_CHECK,
        REDUCE_RESERVES_VALIDATION,
        REPAY_BEHALF_ACCRUE_INTEREST_FAILED,
        REPAY_BORROW_ACCRUE_INTEREST_FAILED,
        REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_CONTROLLER_REJECTION,
        REPAY_BORROW_FRESHNESS_CHECK,
        REPAY_BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_TRANSFER_IN_NOT_POSSIBLE,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_CONTROLLER_OWNER_CHECK,
        SET_INTEREST_RATE_MODEL_ACCRUE_INTEREST_FAILED,
        SET_INTEREST_RATE_MODEL_FRESH_CHECK,
        SET_INTEREST_RATE_MODEL_OWNER_CHECK,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_ORACLE_MARKET_NOT_LISTED,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_RESERVE_FACTOR_ACCRUE_INTEREST_FAILED,
        SET_RESERVE_FACTOR_ADMIN_CHECK,
        SET_RESERVE_FACTOR_FRESH_CHECK,
        SET_RESERVE_FACTOR_BOUNDS_CHECK,
        TRANSFER_CONTROLLER_REJECTION,
        TRANSFER_NOT_ALLOWED,
        TRANSFER_NOT_ENOUGH,
        TRANSFER_TOO_MUCH,
        ADD_RESERVES_ACCRUE_INTEREST_FAILED,
        ADD_RESERVES_FRESH_CHECK,
        ADD_RESERVES_TRANSFER_IN_NOT_POSSIBLE,
        SET_NEW_IMPLEMENTATION
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    /**
      * @dev use this when reporting an opaque error from an upgradeable collaborator contract
      */
    function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return uint(err);
    }
}

contract OracleErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        UPDATE_PRICE
    }

    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        NO_RESERVES,
        PERIOD_NOT_ELAPSED,
        SET_NEW_ADDRESSES,
        SET_NEW_IMPLEMENTATION,
        SET_PENDING_ADMIN_OWNER_CHECK
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }
}

contract FactoryErrorReporter {
    enum Error {
        NO_ERROR,
        INVALID_POOL,
        MARKET_NOT_LISTED,
        UNAUTHORIZED
    }

    //TODO: Add more cases
    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        CREATE_PETH_POOL,
        CREATE_PPIE_POOL,
        DEFICIENCY_ETH_LIQUIDITY_IN_POOL,
        PAIR_IS_NOT_EXIST,
        SET_MIN_LIQUIDITY_OWNER_CHECK,
        SET_NEW_CONTROLLER,
        SET_NEW_EXCHANGE_RATE,
        SET_NEW_IMPLEMENTATION,
        SET_NEW_INTEREST_RATE_MODEL,
        SET_NEW_ORACLE,
        SET_NEW_RESERVE_FACTOR,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SUPPORT_MARKET_BAD_RESULT
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }
}

contract RegistryErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED
    }

    //TODO: Add more cases
    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        SET_NEW_IMPLEMENTATION,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_NEW_FACTORY
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }
}

pragma solidity ^0.7.4;

interface RegistryInterface {

    /**
     *  Returns admin address for cToken contracts
     *  @return admin address
     */
    function admin() external view returns (address payable);

    /**
     *  Returns address of actual PToken implementation contract
     *  @return Address of contract
     */
    function pTokenImplementation() external view returns (address);

    function addPToken(address underlying, address pToken) external returns(uint);
    function addPETH(address pETH_) external returns(uint);
    function addPPIE(address pPIE_) external returns(uint);
}

pragma solidity ^0.7.4;

import './RegistryStorage.sol';
import "./ErrorReporter.sol";
import './RegistryInterface.sol';

contract RegistryProxy is RegistryStorage, RegistryErrorReporter {
    /*** Admin Events ***/

    /**
     * @notice Event emitted when pendingAdmin is changed
     */
    event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);

    /**
     * @notice Event emitted when pendingAdmin is accepted, which means admin is updated
     */
    event NewAdmin(address oldAdmin, address newAdmin);

    /**
      * @notice Emitted when implementation is changed
      */
    event NewImplementation(address oldImplementation, address newImplementation);

    constructor(address _implementation, address pTokenImplementation) {
        admin = msg.sender;
        implementation = _implementation;

        delegateTo(implementation, abi.encodeWithSignature("initialize(address)", pTokenImplementation));
    }

    function setImplementation(address newImplementation) external returns(uint) {
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_NEW_IMPLEMENTATION);
        }

        address oldImplementation = implementation;
        implementation = newImplementation;

        emit NewImplementation(oldImplementation, implementation);

        return(uint(Error.NO_ERROR));
    }

    /**
      * @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
      * @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
      * @param newPendingAdmin New pending admin.
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setPendingAdmin(address payable newPendingAdmin) external returns (uint) {
        // Check caller = admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_ADMIN_OWNER_CHECK);
        }

        // Save current value, if any, for inclusion in log
        address oldPendingAdmin = pendingAdmin;

        // Store pendingAdmin with value newPendingAdmin
        pendingAdmin = newPendingAdmin;

        // Emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin)
        emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
      * @dev Admin function for pending admin to accept role and update admin
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _acceptAdmin() external returns (uint) {
        // Check caller is pendingAdmin and pendingAdmin ≠ address(0)
        if (msg.sender != pendingAdmin || msg.sender == address(0)) {
            return fail(Error.UNAUTHORIZED, FailureInfo.ACCEPT_ADMIN_PENDING_ADMIN_CHECK);
        }

        // Save current values for inclusion in log
        address oldAdmin = admin;
        address oldPendingAdmin = pendingAdmin;

        // Store admin with value pendingAdmin
        admin = pendingAdmin;

        // Clear the pending value
        pendingAdmin = address(0);

        emit NewAdmin(oldAdmin, admin);
        emit NewPendingAdmin(oldPendingAdmin, pendingAdmin);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Internal method to delegate execution to another contract
     * @dev It returns to the external caller whatever the implementation returns or forwards reverts
     * @param callee The contract to delegatecall
     * @param data The raw data to delegatecall
     * @return The returned bytes from the delegatecall
     */
    function delegateTo(address callee, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returnData) = callee.delegatecall(data);
        assembly {
            if eq(success, 0) {
                revert(add(returnData, 0x20), returndatasize())
            }
        }
        return returnData;
    }

    function delegateAndReturn() internal returns (bytes memory) {
        (bool success, ) = implementation.delegatecall(msg.data);

        assembly {
            let free_mem_ptr := mload(0x40)
            returndatacopy(free_mem_ptr, 0, returndatasize())

            switch success
            case 0 { revert(free_mem_ptr, returndatasize()) }
            default { return(free_mem_ptr, returndatasize()) }
        }
    }

    /**
     * @notice Delegates execution to an implementation contract
     * @dev It returns to the external caller whatever the implementation returns or forwards reverts
     */
    fallback() external payable {
        require(msg.value == 0, "RegistryProxy:fallback: cannot send value to fallback");

        // delegate all other functions to current implementation
        delegateAndReturn();
    }

    receive() external payable {
        require(msg.value == 0, "RegistryProxy:receive: cannot send value to receive");
    }
}

pragma solidity ^0.7.4;

contract RegistryStorage {
    address public implementation;
    address public admin;
    address public pendingAdmin;
}

{
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "remappings": [],
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

[{"inputs":[{"internalType":"address","name":"_implementation","type":"address"},{"internalType":"address","name":"pTokenImplementation","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"error","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"info","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"detail","type":"uint256"}],"name":"Failure","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldAdmin","type":"address"},{"indexed":false,"internalType":"address","name":"newAdmin","type":"address"}],"name":"NewAdmin","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldImplementation","type":"address"},{"indexed":false,"internalType":"address","name":"newImplementation","type":"address"}],"name":"NewImplementation","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldPendingAdmin","type":"address"},{"indexed":false,"internalType":"address","name":"newPendingAdmin","type":"address"}],"name":"NewPendingAdmin","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[],"name":"_acceptAdmin","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address payable","name":"newPendingAdmin","type":"address"}],"name":"_setPendingAdmin","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"admin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"implementation","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingAdmin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"}],"name":"setImplementation","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

000000000000000000000000641ec5b05649a39c66392de4905d427d5da9a91f0000000000000000000000003d2d271cb002e6d2022e43549540047202bd76fe

-----Decoded View---------------
Arg [0] : _implementation (address): 0x641ec5b05649a39c66392de4905d427d5da9a91f
Arg [1] : pTokenImplementation (address): 0x3d2d271cb002e6d2022e43549540047202bd76fe

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000641ec5b05649a39c66392de4905d427d5da9a91f
Arg [1] : 0000000000000000000000003d2d271cb002e6d2022e43549540047202bd76fe